Follow these easy steps to get your Zanussi ZCL 56 Refrigerator up and running in no time.
The appliance and the interior fitting are protected for transport. Remove all packaging and any adhesive tape. Any remnants of adhesive can be removed using white spirit.
Locate the appliance in a cool, well-ventilated room, ensuring the air openings are not obstructed. Avoid placing the appliance close to sources of heat, such as a cooker, dishwasher, or radiator.
After transportation, the appliance must not be switched on for 2 hours. This allows the refrigerant to settle.
Plug in the appliance and switch on at the mains supply.
Turn the thermostat control to the required setting. A setting of 3 is usually suitable for normal operation.
Leave the appliance for approximately 4 hours to reach the correct temperature before placing food inside.
Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litre of water) to remove any manufacturing residues.
Level the appliance by adjusting the two adjustable feet at the front of the appliance.